cek temperatur mesin ubuntu

langsung aja cara instalnya,
login sebagai root lalu ketik

apt-get install lm-sensors

sebelum bisa menggunakan aplikasi tersebut kita harus sedikit mengkonfigurasinya, ketik

sensors-detect

maka akan ditanyakan beberapa hal

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):

jawab dengan y (yes) kecuali pertanyaan terakhir jawab dengan n (no) lalu akan ada penampakan seperti ini

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

tekan enter

Do you want to add these lines automatically to /etc/modules? (yes/NO)

seperti biasa dijawab dengan y (yes)

Unloading cpuid... OK

lalu jalankan servicenya

service module-init-tools start

sekarang kita lihat hasilnya dengan mengetik

sensors

lalu akan keluar penampakan kurang lebih seperti ini

root@netpoint:~# sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +44.0°C (high = +86.0°C, crit = +100.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1: +46.0°C (high = +86.0°C, crit = +100.0°C)
it8718-isa-0290
Adapter: ISA adapter
in0: +1.15 V (min = +0.00 V, max = +4.08 V)
in1: +1.95 V (min = +0.00 V, max = +4.08 V)
in2: +3.38 V (min = +0.00 V, max = +4.08 V)
+5V: +3.01 V (min = +0.00 V, max = +4.08 V)
in4: +0.24 V (min = +0.00 V, max = +2.10 V)
in5: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
in7: +3.12 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.25 V
fan1: 0 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
temp1: -55.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: -2.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp3: +29.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
cpu0_vid: +1.350 V

bold=suhu prosesor,
masih adem ,

lanjut lagi,
untuk mengetahui temperatur dari harddisk instal dulu

apt-get install hddtemp

setelah selesai akan ada beberapa penampakan(pertanyaan) tinggal di y (yes), untuk melihat hasilnya ketik

hddtemp /dev/*

*=sesuaikan dengan posisi hardisk masing2
contoh punya TS dengan 3HDD,

root@netpoint:~# hddtemp /dev/sda /dev/sdb /dev/sdc
/dev/sda: WDC WD3200AAJS-00L7A0: 43°C
/dev/sdb: WDC WD1600AAJS-08L7A0: 40°C
/dev/sdc: WDC WD1600AAJS-00V4A0: 38°C

tested on ubuntu 11.04 (64bit),

semoga bermanfaat,


Source FMI :